What are the shipping charges for products like Heat Shrink Boots?

Yes. We keep updating our stock frequently and if a product like Heat Shrink Boots is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Heat Shrink Boots is not in stock then we will let you know.

Where are your products like Heat Shrink Boots manufactured?

Yes. We keep updating our stock frequently and if a product like Heat Shrink Boots is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Heat Shrink Boots?

Yes. We keep updating our stock frequently and if a product like Heat Shrink Boots is not in stock then we will let you know.

How long will it take to receive the order that I placed for Heat Shrink Boots?

Yes. We keep updating our stock frequently and if a product like Heat Shrink Boots is not in stock then we will let you know.

Are your products Heat Shrink Boots in stock?

Yes. We keep updating our stock frequently and if a product like Heat Shrink Boots is not in stock then we will let you know.

Heat Shrink Boots | Shrink Moulded Shapes

New items

TC43-N2 RS, Sibille

The Sibille LV insulating cap N°2 for conductor ends. The LV insulating cap is used to insulate by covering the ends of conductors and terminals during a replacement operation or removal of equipment on indoor installations

Product Detail

New items

SKE4/10, 3M

Adhesive Lined End Caps Heat shrinkable end caps used for sealing cable ends and provide mechanical and environmental protection. Heat shrink heavy duty end caps rapidly shrink The melted adhesive lining flows and covers the substrate A flexible bond is formed with variety of rubbers, metals and plastics Adhesive solidifies once cool Permanent non drying flexible water resistant barrier Reflow occurs at temperatures above +80°C Note RoHS

Product Detail

New items

804530, 3M

EC series cold shrink end caps Cold shrink end caps are moulded in black EPR, are UV-resistant and are pre-expanded on an applicator ring for easy application on-site or in storage areas, without the need for grease, tools or a torch; they ensure a reliable seal. They provide excellent resistance to various chemical and atmospheric agents (ultraviolet light, ozone) as well as to abrasion and deformation. Used to block moisture penetration in all types of cables waiting to be connected or used in trenches, along roads or on cable drums or sheath ends. Mechanical protection of cable ends.

Product Detail

New items

ES-CAP-NO.3-B8-0-40MM-RS, TE Connectivity

End Caps 4:1 Specially designed to provide mechanical and environmental protection of stubs and splices in electrical harnesses and also ideal for sealing off cable ends. Clear cap allows see through inspection, black caps are flame retardant. Thick adhesive-lining forms an effective barrier against fluids & moisture 4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters Mechanically tough jacket provides strain relief and abrasion protection Range; -40°C to +105°C. min recovery 100°C 100 per bag. Dimensions (mm) Stock No. Length as supp. Inside Diameter Wall Thickness Expanded as supplied Recovered after heating Recovered wall after heating 316-0880 30 5.72 1.27 0.64 316-0903 30 7.44 1.65 0.76 316-0925 40 10.85 2.41 0.89 316-0896 30 5.72 1.27 0.64 316-0931 30 7.44 1.65 0.76 316-0919 40 10.85 2.41 0.89 Approvals UL recognised component Approvals UL Listed (E85381)

Product Detail

New items

202K132-25-0, TE Connectivity

General Purpose (Lipped) - 202K1 and 222K1 Series Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

Product Detail

New items

222K174-25-0, TE Connectivity

General Purpose (Lipped) - 202K1 and 222K1 Series Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

Product Detail

New items

DRC40-BT, Deutsch

Deutsch DRC Series Connector Boots A series of protective boots suitable for use with the DRC series of connector. Deutsch DRC Series Heavy Duty Connectors Deutsch DRC Series is a fully enviromentally sealed high density connector family, ideally suited for use within engine control systems, traction controls, ABS systems and electronic panels.

Product Detail

New items

43458, Amphenol Socapex

Sealing sleeves SL 61 Splashproof sealing sleeves for plugs. For use with straight or angled standard connectors (sleeve fitted inside). Amphenol - SL 61 Series Circular Connectors This family of connectors is widely used in industrial and electronic applications. This series includes: sockets fitted with male or female contacts, plugs with a choice of straight or angled connectors and accessories (blanking plugs, sealing sleeves). Available in four enclosure sizes, four types of contacts including currents ranging from 7.5 to 50 Amperes, and different contact arrangements. Connected using screws, with positioning and guiding pin.

Product Detail

New items

43473, Amphenol Socapex

Sealing sleeves SL 61 Splashproof sealing sleeves for plugs. For use with straight or angled standard connectors (sleeve fitted inside). Amphenol - SL 61 Series Circular Connectors This family of connectors is widely used in industrial and electronic applications. This series includes: sockets fitted with male or female contacts, plugs with a choice of straight or angled connectors and accessories (blanking plugs, sealing sleeves). Available in four enclosure sizes, four types of contacts including currents ranging from 7.5 to 50 Amperes, and different contact arrangements. Connected using screws, with positioning and guiding pin.

Product Detail

New items

317-1397-000, ITT Cannon

Sureseal Cable Boots Seals wired cable jackets to the connector housing Provides abrasion resistance Dimensions (mm) A B C Outer cable Stock no. 16.51 9.65 52.07 5.28 → 5.79 167-9540 15.49 9.65 52.07 5.59 → 6.10 167-9556 19.05 12.7 52.07 8.76 → 9.65 167-9562 Note Contacts must be ordered separately Plug & receptacle material Perbunan or Nitrile-Butadiene rubber Contact material Tin-lead plated copper alloy Current rating 16A per contact Contact resistance 10mΩ max. Insulation resistance 100MΩ min. Dielectric withstanding voltage 1200Vac at sea level Operating temperature -40°C to +105°C Sealing IP67 acc. to DIN 40050 Durability 50 cycles mating & unmating Salt spray MIL-STD-202D Method 101 D Humidity 95% at 95°C for 1000 hours Industrial gas Equivalent to MIL-C-23216 Technical specification Plug and receptacle material Perbunan or Nitrile-Butadiene rubber Contact material Copper alloy, tin lead plate Current 8A Contact resistance 10mΩ max. Insulation resistance 100MΩ min. Operating temperature -40°C to +105°C Environmental sealing IP67 (DIN 40050) Durability 50 cycles Salt spray MIL-STD-202D, method 101D Humidity 95% at 95°C/1000 hours Industrial gas MIL-C-23216

Product Detail

New items

202S163-25C-0, TE Connectivity

TE Connectivity (TE) now offers the Rayaten family of high performance, rugged, versatile, heat-shrinkable molded parts, that offer lightweight screening capability of 70 db of attenuation up to 1 Ghz. When looking for high reliability, excellent strain relief and enhanced EMI performance, in a small, rugged, environmentally sealed product, you can count on the Rayaten family of molded parts. Fits most circular connectors and backshells Approximately 2:1 shrink ratio Straight, right-angled, and transitional shapes available D Subminiature options for rectangular connector backshells Abrasion resistant Resists most common military fuels, oils, and greases 70 dB of attenuation up to 1 Ghz EMI continuity from harness braid through the backshell New and improved coating Coatings can be custom designed

Product Detail

New items

202S142-25C-0, TE Connectivity

TE Connectivity (TE) now offers the Rayaten family of high performance, rugged, versatile, heat-shrinkable molded parts, that offer lightweight screening capability of 70 db of attenuation up to 1 Ghz. When looking for high reliability, excellent strain relief and enhanced EMI performance, in a small, rugged, environmentally sealed product, you can count on the Rayaten family of molded parts. Fits most circular connectors and backshells Approximately 2:1 shrink ratio Straight, right-angled, and transitional shapes available D Subminiature options for rectangular connector backshells Abrasion resistant Resists most common military fuels, oils, and greases 70 dB of attenuation up to 1 Ghz EMI continuity from harness braid through the backshell New and improved coating Coatings can be custom designed

Product Detail