Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 306

Showing Results For: Heat Shrink Boots

Heat Shrink Boots


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
TE Connectivity
Rohs Verified
EP8860-000, TE Connectivity
19998 In Stock
Check Stock & Lead Times Packaging Options
50 +
£ 0.138
250 +
£ 0.13
500 +
£ 0.123
TE Connectivity
Rohs Verified
EP8861-000, TE Connectivity
15998 In Stock
Check Stock & Lead Times Packaging Options
8000 +
£ 0.158
16000 +
£ 0.152
24000 +
£ 0.147
Rohs Verified
TE100048806, 3M
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 51.08
15 +
£ 48.53
50 +
£ 47.00
TE Connectivity
Rohs Verified
EP8862-000, TE Connectivity
13998 In Stock
Check Stock & Lead Times Packaging Options
7000 +
£ 0.178
14000 +
£ 0.171
21000 +
£ 0.164
Penta
TC43-N3, Penta
68 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 3.78
TE Connectivity
Rohs Verified
EP8858-000, TE Connectivity
29998 In Stock
Check Stock & Lead Times Packaging Options
15000 +
£ 0.133
30000 +
£ 0.128
45000 +
£ 0.122
Penta
TC43-N2, Penta
28 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 3.47
TE Connectivity
Rohs Verified
EP8855-000, TE Connectivity
29998 In Stock
Check Stock & Lead Times Packaging Options
50 +
£ 0.103
250 +
£ 0.097
500 +
£ 0.093
Penta
TC43-N4, Penta
108 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 3.92
TE Connectivity
Rohs Verified
EP8864-000, TE Connectivity
3998 In Stock
Check Stock & Lead Times Packaging Options
4000 +
£ 0.268
8000 +
£ 0.257
12000 +
£ 0.247
Rohs Verified
TE100048822, 3M
23 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 82.89
15 +
£ 78.75
50 +
£ 76.26
TE Connectivity
Rohs Verified
EP8859-000, TE Connectivity
Pre Order
Check Stock & Lead Times Packaging Options
50 +
£ 0.156
250 +
£ 0.148
500 +
£ 0.14
Rohs Verified
TE100048780, 3M
262 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 40.39
15 +
£ 38.38
50 +
£ 37.16
TE Connectivity
Rohs Verified
EP8863-000, TE Connectivity
4998 In Stock
Check Stock & Lead Times Packaging Options
5000 +
£ 0.221
10000 +
£ 0.212
15000 +
£ 0.204
Penta
TC43-N1, Penta
588 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 3.41
Penta
TC30, Penta
7 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 4.52
Penta
TC25, Penta
94 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 3.50
Penta
TC35, Penta
134 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 5.35
Rohs Verified
TNA24CA02-26L / 192991-0013, ITT Cannon
522 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 2.62
Rohs Verified
TNA16CA02-18L / 192991-0015, ITT Cannon
290 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 3.66
20 +
£ 3.28
40 +
£ 2.95
Penta
TC43P, Penta
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 7.61
Penta
TC41, Penta
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 14.09
Rohs Verified
DE272919460, 3M
77 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1.87
15 +
£ 1.78
50 +
£ 1.75
Rohs Verified
XA003894921, 3M
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 15.69
15 +
£ 14.89
50 +
£ 14.40
Sibille
TC43-N2 RS, Sibille
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 72.85
Showing
1 -

New Items
New items
TC43-N2 RS, Sibille

TC43-N2 RS, Sibille

The Sibille LV insulating cap N°2 for conductor ends. The LV insulating cap is used to insulate by covering the ends of conductors and terminals during a replacement operation or removal of equipment on indoor installations
New items
SKE4/10, 3M

SKE4/10, 3M

Adhesive Lined End Caps Heat shrinkable end caps used for sealing cable ends and provide mechanical and environmental protection. Heat shrink heavy duty end caps rapidly shrink The melted adhesive lining flows and covers the substrate A flexible bond is formed with variety of rubbers, metals and plastics Adhesive solidifies once cool Permanent non drying flexible water resistant barrier Reflow occurs at temperatures above +80°C Note RoHS
New items
DT12P-BT-BK, Deutsch

DT12P-BT-BK, Deutsch

DT Series Connector Protective Boots From Deutsch, the DT Series connector boots offer increased environmental protection of the connector system, protecting against water splashing and dust ingress and also providing a degree of impact protection. Deutsch DT Series Connectors Deutsch DT series connectors are ideally suited for applications that require a secure reliable connector in harsh environments such as under-the-hood, transmission tunnels and many others areas that require secure connections in both power and signal.
New items
322A134-25-0, TE Connectivity

322A134-25-0, TE Connectivity

45° and 90° Side Breakout T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. Features and Benefits • Provides strain relief, protection and mechanical support • Shrink Ratio 2:1 • Flame retardant
New items
204W221-25/225-0, TE Connectivity

204W221-25/225-0, TE Connectivity

Lipped - 204W221 Series TE Connectivity Thermofit polyolefin moulded heat shrink cable boots are flame retardant and semi-rigid. The Thermofit series is available in a wide range of sizes to suit various cables and connectors.
New items
317-1397-000, ITT Cannon

317-1397-000, ITT Cannon

Sureseal Cable Boots Seals wired cable jackets to the connector housing Provides abrasion resistance Dimensions (mm) A B C Outer cable Stock no. 16.51 9.65 52.07 5.28 → 5.79 167-9540 15.49 9.65 52.07 5.59 → 6.10 167-9556 19.05 12.7 52.07 8.76 → 9.65 167-9562 Note Contacts must be ordered separately Plug & receptacle material Perbunan or Nitrile-Butadiene rubber Contact material Tin-lead plated copper alloy Current rating 16A per contact Contact resistance 10mΩ max. Insulation resistance 100MΩ min. Dielectric withstanding voltage 1200Vac at sea level Operating temperature -40°C to +105°C Sealing IP67 acc. to DIN 40050 Durability 50 cycles mating & unmating Salt spray MIL-STD-202D Method 101 D Humidity 95% at 95°C for 1000 hours Industrial gas Equivalent to MIL-C-23216 Technical specification Plug and receptacle material Perbunan or Nitrile-Butadiene rubber Contact material Copper alloy, tin lead plate Current 8A Contact resistance 10mΩ max. Insulation resistance 100MΩ min. Operating temperature -40°C to +105°C Environmental sealing IP67 (DIN 40050) Durability 50 cycles Salt spray MIL-STD-202D, method 101D Humidity 95% at 95°C/1000 hours Industrial gas MIL-C-23216
New items
ES-CAP-NO.3-B8-0-40MM-RS, TE Connectivity

ES-CAP-NO.3-B8-0-40MM-RS, TE Connectivity

End Caps 4:1 Specially designed to provide mechanical and environmental protection of stubs and splices in electrical harnesses and also ideal for sealing off cable ends. Clear cap allows see through inspection, black caps are flame retardant. Thick adhesive-lining forms an effective barrier against fluids & moisture 4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters Mechanically tough jacket provides strain relief and abrasion protection Range; -40°C to +105°C. min recovery 100°C 100 per bag. Dimensions (mm) Stock No. Length as supp. Inside Diameter Wall Thickness Expanded as supplied Recovered after heating Recovered wall after heating 316-0880 30 5.72 1.27 0.64 316-0903 30 7.44 1.65 0.76 316-0925 40 10.85 2.41 0.89 316-0896 30 5.72 1.27 0.64 316-0931 30 7.44 1.65 0.76 316-0919 40 10.85 2.41 0.89 Approvals UL recognised component Approvals UL Listed (E85381)
New items
342A034-25-0, TE Connectivity

342A034-25-0, TE Connectivity

45° and 90° Side Breakout T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. Features and Benefits • Provides strain relief, protection and mechanical support • Shrink Ratio 2:1 • Flame retardant
New items
202K232-100/180-0, TE Connectivity

202K232-100/180-0, TE Connectivity

Zero Halogen (Lipped) - 202K1 and 222K1 Series Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting. Features and benefits • Low smoke Low emission properties • Excellent sealing and strain relief • Dielectric strength: 15MV/m Dimensions (mm) Size Straight Right angled A A1 B B1 P R C C1 D D1 P R 1 24 10.4 14 5.6 38 21 24 10.4 14 5.6 25 25 2 30 14.2 15 5.9 55 32 30 14.2 15 5.9 32 27 3 31 18 18 7.1 67 35 31 18 18 7.1 39 31 4 36 22.4 21 8.4 80 42 36 22.4 21 8.4 46 38 5 43 28.2 25 9.9 99 61 43 28.2 25 9.9 55 45 6 52 35.1 39 15.7 130 72 52 35.1 39 15.7 80 54 Note If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots Standards DEF STAN 59/97 issue 3 Type DF
New items
222A 132-3-0, TE Connectivity

222A 132-3-0, TE Connectivity

Lipless - 202A1 Series Lipless heatshrink boot allows direct mounting to the back of the connector Manufactured from fluid resistant elastomer Temperature Rating (°C) -75 to +150
New items
202K132-25-0, TE Connectivity

202K132-25-0, TE Connectivity

General Purpose (Lipped) - 202K1 and 222K1 Series Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
New items
222K174-25-0, TE Connectivity

222K174-25-0, TE Connectivity

General Purpose (Lipped) - 202K1 and 222K1 Series Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Heat Shrink Boots and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Heat Shrink Boots or any other product.
This depends on the Heat Shrink Boots individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Heat Shrink Boots and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Heat Shrink Boots.
Yes. We keep updating our stock frequently and if a product like Heat Shrink Boots is not in stock then we will let you know.