What are the shipping charges for products like Chassis Mounting Transformers?

Yes. We keep updating our stock frequently and if a product like Chassis Mounting Transformers is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Chassis Mounting Transformers is not in stock then we will let you know.

Where are your products like Chassis Mounting Transformers manufactured?

Yes. We keep updating our stock frequently and if a product like Chassis Mounting Transformers is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Chassis Mounting Transformers?

Yes. We keep updating our stock frequently and if a product like Chassis Mounting Transformers is not in stock then we will let you know.

How long will it take to receive the order that I placed for Chassis Mounting Transformers?

Yes. We keep updating our stock frequently and if a product like Chassis Mounting Transformers is not in stock then we will let you know.

Are your products Chassis Mounting Transformers in stock?

Yes. We keep updating our stock frequently and if a product like Chassis Mounting Transformers is not in stock then we will let you know.

Chassis Mounting Transformers | Chassis Transformers

New items

6 423 65, Legrand

Control Panel Primary 230/400Vac (40 to 220VA) Compact, open type control panel transformer Fully shrouded screw terminals with permanent marking Detailed product specification permanently marked on front of unit VA ratings compatible with available protection devices Dual standard primary winding 230 / 400Vac Construction Class 1 Insulation 3550V (Primary to Secondary); 2400V (Primary to Earth); 250V (Secondary to Earth) Operating Temperature +35°C (Max Ambient) Note Mounting clips are not supplied with these products. Transformers up to 160 VA can be clipped to DIN rail using accessory 0044 16, RS stock number 423-2201 or 620-3592 for higher values or directly fixed using screws through the easily accessible fixing points. Standards IEC/EN 61 558 Approvals 8888 Standards IEC/EN 61-558-2-4 Laminated

Product Detail

New items

TTMS 3150/230, Block

TTMS Series Medical Transformers The TTMS series of isolation transformers have a rated input of 230 V ac and a rated output voltage of 115 V ac and 230 V ac. These isolation transformers are protected from overload by a PTC resistor that is integrated in every coil to set up an external monitoring unit. Reduced starting currents enable excellent switch-on behaviour and these isolation transformers feature low short circuit voltage and very low idle current. BLOCKIMPEX vacuum impregnation allows for low noise and excellent corrosion protection. With a robust metal fixing rail featuring 8 oval slots, these isolation transformers are easy to mount. Features & Benefits Safe galvanic isolation IP00 protection 97% efficient Insulation class B UVV BGV A3 compliant contact protected screw terminals +40°C maximum ambient temperature Product Application Information These isolation transformers have been designed for supplying user group 2 medical rooms. Brand Information BLOCK is a global leader in power supply interface. Developing and producing switched mode power supplies through to coiled goods, BLOCK also offer cast resin optimisation and software development. Laminated

Product Detail

New items

STEU320/23, Block

Safety Isolating Transformer Safety isolating and isolating control transformers Twin secondary winding for series or parallel connection 63,100,160 and 250VA transformers can be mounted on standard 35mm DIN rail All units have 4 hole panel mount fixings Easy installation 4mm² cage clamp terminals Insulation catagory Class B Primary connections 0V, -15V, +15V, 230V, 400V. The + 15 and -15V allows you to offset the primary Voltage by 15V Low inrush current High efficiency, low regulation Approvals UL Recognised Component for Canada & US Standards EN 61558, VDE0570 Approvals UL Recognised Component for Canada & US Standards EN 61558, VDE0570

Product Detail

New items

STEU320/24, Block

Safety Isolating Transformer Safety isolating and isolating control transformers Twin secondary winding for series or parallel connection 63,100,160 and 250VA transformers can be mounted on standard 35mm DIN rail All units have 4 hole panel mount fixings Easy installation 4mm² cage clamp terminals Insulation catagory Class B Primary connections 0V, -15V, +15V, 230V, 400V. The + 15 and -15V allows you to offset the primary Voltage by 15V Low inrush current High efficiency, low regulation Approvals UL Recognised Component for Canada & US Standards EN 61558, VDE0570 Approvals UL Recognised Component for Canada & US Standards EN 61558, VDE0570

Product Detail

New items

ABT7PDU160G, Schneider Electric

ABT7PDU series transformers This range of covered (up to 320 VA) or uncovered (from 400 to 2500 VA) transformers features double winding. Secondary winding coupling series or parallel with signalling LED and earthing by internal jumpers (up to 320 VA) or plug-in jumpers (from 400 to 2500 VA). Panel mounting using 4 screws. Input voltage: 230 / 400 Vac (± 15 V) single-phase Input frequency: 47 → 63 Hz Secondary output: double-winding Output voltage: 2 x 24 V (xxB) or 2 x 115 V (xxG) Protection level: IP 20 Operating temperature: -20 °C → +40 °C Approvals CURus, ENEC Laminated Frame 230Vac Primary 75VA to 200VA (Multi Tapped) Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding. Double section bobbin construction Fully shrouded bobbins Full varnish impregnation Multi-hole frame fixing Solder tag terminations 100% electrical and flash tested Tested in accordance with BS3535 and EN 60 742

Product Detail

New items

TT1 6,3-44-23, Block

TT1 Series Isolating Transformer High-quality multi-purpose panel mount isolating transformers from the Block TT1 series. The transformers are designed for the safe isolation of the input and output sides. They can be used to set up protective separation as a protective measure. Features and Benefits: Safe galvanic isolation Integrated crane eyes Non-slip terminals Corrosion protections and low noise Horizontal design ensures space saving

Product Detail

New items

CE1500TH, Sola

SolaHD International Series Control Transformers The International series transformers have been designed to comply with the demands of electromagnetic control components which can demand inrush currents of up to 10 times the nominal rating without sacrificing secondary voltage stability beyond practical limits. They fully comply with IEC and NEMA standards and are available with IEC touch proof covers (IP20). Epoxy encapsulated for cooler operation Interleaved copper windings reduce I²R losses and maximize efficiency 50/60 Hz +55 °C Rise, +105 °C insulation system for harsh, heavy duty applications Standards Exceeds IEC, NEMA, ANSI, NMTBA, JIC and automotive standards

Product Detail

New items

CE1000MH, Sola

SolaHD International Series Control Transformers The International series transformers have been designed to comply with the demands of electromagnetic control components which can demand inrush currents of up to 10 times the nominal rating without sacrificing secondary voltage stability beyond practical limits. They fully comply with IEC and NEMA standards and are available with IEC touch proof covers (IP20). Epoxy encapsulated for cooler operation Interleaved copper windings reduce I²R losses and maximize efficiency 50/60 Hz +55 °C Rise, +105 °C insulation system for harsh, heavy duty applications Standards Exceeds IEC, NEMA, ANSI, NMTBA, JIC and automotive standards

Product Detail

New items

CE1500MH, Sola

SolaHD International Series Control Transformers The International series transformers have been designed to comply with the demands of electromagnetic control components which can demand inrush currents of up to 10 times the nominal rating without sacrificing secondary voltage stability beyond practical limits. They fully comply with IEC and NEMA standards and are available with IEC touch proof covers (IP20). Epoxy encapsulated for cooler operation Interleaved copper windings reduce I²R losses and maximize efficiency 50/60 Hz +55 °C Rise, +105 °C insulation system for harsh, heavy duty applications Standards Exceeds IEC, NEMA, ANSI, NMTBA, JIC and automotive standards

Product Detail

New items

STEU2000/23, Block

Safety Isolating Transformer Safety isolating and isolating control transformers Twin secondary winding for series or parallel connection 63,100,160 and 250VA transformers can be mounted on standard 35mm DIN rail All units have 4 hole panel mount fixings Easy installation 4mm² cage clamp terminals Insulation catagory Class B Primary connections 0V, -15V, +15V, 230V, 400V. The + 15 and -15V allows you to offset the primary Voltage by 15V Low inrush current High efficiency, low regulation Approvals UL Recognised Component for Canada & US Standards EN 61558, VDE0570 Approvals UL Recognised Component for Canada & US Standards EN 61558, VDE0570

Product Detail

New items

USTE100/2X115, Block

Universal Input Control Transformer 208 to 600Vac Universal input transformers are designed for worldwide usage and fulfill the requirements for control safety isolating and isolating transformers suitable for DIN Rail mounting (to 250VA) or footplate mounting (all types) and the use of cage clamp terminals makes installation an easy task Input voltages 208V, 230V, 380V, 400V, 415V, 440V, 460V, 480V, 500V, 525V, 550V, 575V, 600V provide a large range of output current Vacuum resin impregnation Construction Class 1 Operating temperature +40°C Maximum Ambient Insulation category Class B Approvals VDE, UL recognised, CUL Approvals 8888

Product Detail

New items

0 428 77, Legrand

Control Panel Primary 230/400Vac (310 to 1000VA) Compact, open type control panel transformer Fully shrouded screw terminals with permanent marking Detailed product specification permanently marked on front of unit VA ratings compatible with available protection devices Dual standard primary winding 230 / 400Vac Construction Class 1 Insulation 3550V (Primary to Secondary); 2400V (Primary to Earth); 250V (Secondary to Earth) Operating Temperature +35°C (Max Ambient) Note Mounting clips are not supplied with these products. Transformers up to 160 VA can be clipped to DIN rail using accessory 0044 16, RS stock number 423-2201 or 620-3592 for higher values or directly fixed using screws through the easily accessible fixing points. Standards IEC/EN 61 558 Approvals 8888 Laminated

Product Detail