Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

0.0 / 5

Reviews 0 Not Rated Yet
Pilz Profile

Website
Manufacturer Type
Company Size
Location
Founded
Specialties
Reviews
5 star
(0%)
4 star
(0%)
3 star
(0%)
2 star
(0%)
1 star
(0%)

Be the first to review this manufacturer.
Don’t hesitate to ask questions for better clarification.

Featured Products


Popular Categories For Pilz




New Items
New items
PNOZ m ES Powerlink, Pilz

PNOZ m ES Powerlink, Pilz

PNOZmulti 2 Communication/Fieldbus Module Powerlink The PNOZ m ES Powerlink expansion module connects to a base unit from the PNOZmulti 2 configurable control system. Features and Benefits Can be configured in the PNOZmulti Configurator Connection for Ethernet POWERLINK (Ethernet POWERLINK V 2 protocol) Station addresses from 1 ... 239, selected via rotary switch The minimum cycle time for an application of 32 B Output and 32 B Input is275μs The minimum cycle time is 500 μs at the maximum PDO size of 254 B Input and 32 B Output 128 virtual inputs and outputs on the control system PNOZmulti can be defined in the PNOZmulti Configurator for communication with the fieldbus Ethernet POWERLINK Maximum 1 PNOZ m ES Powerlink can be connected to the base unit Transmission rate: 100 Mbps Connection to fieldbus via RJ45 connector Approvals CE, cULus Listed, TÜV, BG, CCC. Supplied with Screw terminals. Safety Controller
New items
773732, Pilz

773732, Pilz

PNOZmulti Fieldbus Module, Profibus-DP Station addresses from 0 to 99 In accordance with EN50170 non-safety related applications Communication with Profibus-DP Note You will require the PNOZ m1p or PNOZ m0p Approvals UL,CCC Approvals UL,CCC Safety Controller
New items
506405, Pilz

506405, Pilz

PSENmag Non Contact Switches, Square The PSENmag Non-contact Switch meets the highest safety requirements offers a complete solution that is safe and economical. It is approved up to PLe of EN ISO 13849-1, SIL 3 of EN/IEC 62061 and Category 4 of EN 954-1. Features and Benefits Connected via a plug connection or with cable Flexible cable outlet, including connector, so there is no need for an angled connector Flexible mounting, both the sensor and the actuator support every conceivable mounting configuration Cost effective thanks to series connection Operating distance of 3 mm or 10 mm Extra signal contact and LED Applications The PSENmag safety switch is suitable for use in applications with heavy soiling, thanks to its non-contact design. Note Only stock nos. 744-8702 and 824-4918 have an LED. Standards EN954-1 (Cat 4), EN60204-1, EN60947-5-3. Approvals CE, cULus Listed, TÜV. Supplied with Actuator.
New items
PNOZ s6.1 24VDC 3 n/o 1 n/c, Pilz

PNOZ s6.1 24VDC 3 n/o 1 n/c, Pilz

PNOZ s6 and PNOZ s6.1 Safety Relays Safety relay for two-handed controls During dangerous movements, the relay requires the operator to keep both hands out of the danger zone Applications: mechanical presses, hydraulic presses, safety control circuits Removable terminals with connection via spring terminals Display LEDs for relay status DIN rail mounting 1 solid state output Standards EN574 IIIC (PNOZ s6); EN574 IIIA (PNOZ s6.1)
New items
PSEN cs3.1p, Pilz

PSEN cs3.1p, Pilz

PSENcode Compact Non-Contact Safety Switch, Coded The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from the PSEN cs3.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection (safety function) Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs 1 signal output LED display for state of the actuator, state of the inputs and supply voltage/fault 1 direction of actuation IP69K protection Stock no. 918-6655 has an M12 8 pole male connector Stock no. 918-6664 has an M8 8 pole male connector Approvals CE, cULus Listed, TÜV, BG, CCC. Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3 with the actuator PSEN cs3.1 PDDB; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 coding level Low, Type4. Supplied with Actuator.
New items
PSEN cs3.1 M12, Pilz

PSEN cs3.1 M12, Pilz

PSENcode Compact Non-Contact Safety Switch, Coded The PSEN cs3.1 and PSEN cs3.1p safety switches are coded and only switch with an actuator from the PSEN cs3.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection (safety function) Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs 1 signal output LED display for state of the actuator, state of the inputs and supply voltage/fault 1 direction of actuation IP69K protection Stock no. 918-6655 has an M12 8 pole male connector Stock no. 918-6664 has an M8 8 pole male connector Approvals CE, cULus Listed, TÜV, BG, CCC. Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3 with the actuator PSEN cs3.1 PDDB; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 coding level Low, Type4. Supplied with Actuator.
New items
PNOZ mm0.1p, Pilz

PNOZ mm0.1p, Pilz

PNOZmulti Mini Base Unit, Safety Controller The PNOZmulti Mini configurable safety relay from Pilz has an integral LCD display which provides status information and diagnostic messages. This safety controller has all the functions of the established PNOZmulti yet is only a space saving 45mm wide. A major advantage of the PNOZmulti Mini is that all required functions are configured directly via a PC running the PNOZmulti Configurator Software, instead of relying on wiring together different safety relays. 20 inputs 4 safe semiconductor outputs 4 test pulse outputs LCD display for information and diagnostics USB configuration interface Can be configured using the PNOZmulti Configurator Compatible with PNOZmulti Approvals UL/cUL, EC, TÜV, BG, CCC Safety Controller
New items
PNOZ s6 48-240VACDC 3 n/o 1 n/c, Pilz

PNOZ s6 48-240VACDC 3 n/o 1 n/c, Pilz

PNOZ s6 and PNOZ s6.1 Safety Relays Safety relay for two-handed controls During dangerous movements, the relay requires the operator to keep both hands out of the danger zone Applications: mechanical presses, hydraulic presses, safety control circuits Removable terminals with connection via spring terminals Display LEDs for relay status DIN rail mounting 1 solid state output Standards EN574 IIIC (PNOZ s6); EN574 IIIA (PNOZ s6.1)
New items
PNOZ mm0p 24VDC, Pilz

PNOZ mm0p 24VDC, Pilz

PNOZmulti Mini Base Unit, Safety Controller The PNOZmulti Mini configurable safety relay from Pilz has an integral LCD display which provides status information and diagnostic messages. This safety controller has all the functions of the established PNOZmulti yet is only a space saving 45mm wide. A major advantage of the PNOZmulti Mini is that all required functions are configured directly via a PC running the PNOZmulti Configurator Software, instead of relying on wiring together different safety relays. 20 inputs 4 safe semiconductor outputs 4 test pulse outputs LCD display for information and diagnostics USB configuration interface Can be configured using the PNOZmulti Configurator Compatible with PNOZmulti Approvals UL/cUL, EC, TÜV, BG, CCC Safety Controller
New items
542011, Pilz

542011, Pilz

PSENcode Slim Non-Contact Safety Switch, Coded The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only switch when used with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset. Features and Benefits Transponder technology for presence detection Coded switch Dual-channel operation 2 safety inputs for series connection of multiple safety switches 2 safety outputs Safety Device Diagnostics (SDD) Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters Diagnostic input for Y1 for Safety Device Diagnostics (SDD) Signal output/diagnostic output Y32 for Safety Device Diagnostics LED display for state of actuator detection, state of the inputs and supply voltage/fault IP66 / IP67 protection PSEN cs5.11 (stock no. 918-6667 ) 1 actuation direction with 3 approach directions: square marking for normal operating distance M12 8 pole male connector 30 N holding force PSEN cs5.1p (stock no. 918-6661 ) 4 actuation directions, each with 3 approach directions: square marking for normal operating distance and triangle marking for short operating distance M8 8 pole male connector Caution The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing. Standards EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Type4. Approvals CE, TÜV, UL/cUL, FCC, IC, ECOLAB. Supplied with Actuator.