Allen Bradley Guardmaster Profile
Featured Products
Sprite 3 A miniature hinge operated safety interlock switch with 2 sets of contacts and a full IP67 ingress...
MC2, Coded, IP69K Non-contact actuation Magnetic coded sensing High tolerance to misalignment LED indication 2 N/C solid state relay outputs and...
Our Bulletin 889 DC Micro (M12) Cordsets & Patchcords provide secure connections for proximity sensors, limit switches, photoelectric sensors and...
Our Bulletin 889 DC Micro (M12) Cordsets & Patchcords provide secure connections for proximity sensors, limit switches, photoelectric sensors and...
Safedge Controller, Surface Mount EC type approved (applies when Safedge profiles are used in conjunction with a Sa...
Minotaur MSR127RTP Safety Relay, Single Channel The MSR127RTP is a single function safety relay that can be...
Ferrogard 6, 9 & 10 Slim Non Contact Safety Switch The Ferrogard FRS 6, 9 and 10 are magnetically actuated...
Allen-Bradley Safety Switch Accessories A range of accessories for Allen-Bradley safety switches....
SensaGuard 440N Cylindrical Non-Contact Switch The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with slid...
Minotaur MSR126R and MSR126T, Single or Dual Channel The MSR126R/T is designed for connection to a single channel safety gate, a single channel...
MatGuard 440F Series Safety Mats The MatGuard safety mat is a pressure-sensitive safeguarding product that...
Allen-Bradley Sipha S2 Non-contact Safety Switch The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it...
Popular Categories For Allen Bradley Guardmaster
Popular Items
Popular items
440R-N23130, Allen Bradley Guardmaster
Minotaur MSR127RTP Safety Relay, Single Channel
The MSR127RTP is a single function safety relay that can be connected in three different input wiring configurations: one normally closed, two normally closed, or with two PNP connections from a light curtain. When connected in the two normally closed configuration, the MSR127RTP checks for cross faults across the two inputs. When connected to light curtains, the light curtain must perform the cross fault detection.
The MSR127RP relay has a monitored manual reset whereas the MSR127TP relay has an automatic/manual reset. Models with automatic/manual reset can have the reset jumpered or can be converted to an unmonitored manual reset by adding a normally open switch in the monitoring loop. Models with monitored manual reset provide checking of the output monitoring circuit.
The outputs of the relay include three normally open safety-rated outputs as well as one normally closed auxiliary output. The safety outputs have independent and redundant internal contacts to support the safety function. The auxiliary output is a non-safety output intended to provide an external signal about the status of the safety outputs.
Can be connected in three different input wiring configurations: 1 N/C, 2 N/C, or with 2 PNP connections from a light curtain. When connected to light curtains, the light curtain must perform the cross fault detection.
Stop category 0
Cross fault monitoring
Monitored or automatic reset
Removable terminals
Light curtain, E-stop or safety gate applications
Cat. 4 per EN954-1
Standards
EN 954-1, ISO 13849-1, IEC/EN 60204-1, IEC 60947-4-1, IEC 60947-5-1, ANSI B11.19, AS4024.1.
Popular items
450L-APR-ED-8, Allen Bradley Guardmaster
Muting Light Curtain Monitoring Relays allow the automatic temporary suspension of the safety function if certain conditions are met. In material handling applications, material is allowed to pass through the protective field without shutting down the machine. In addition to muting, these modules monitor up to three light curtains with presence sensing device initiation (PSDI)
Allows the automatic temporary suspension of the safety function if certain conditions are met
Monitors up to three light curtains with presence sensing device initiation (PSDI)
450L Plug-in, Bottom(connection), Receiver, EDM, M12, 8 pin, male
Popular items
440E-LL5SN8, Allen Bradley Guardmaster
Our Lifeline™ 4 Cable Pull Switches can be installed along or around awkward machinery such as conveyors and provide a constant emergency stop access. The system includes a rope status indicator and emergency stop button mounted on the switch lid. This switch is also available in stainless steel 316 and is suitable for external use, applications where there are hygiene requirements, and other situations where a level of corrosion resistance is required
Provide switch span of 75...125 m
Includes universal mounting and operation
Includes lid mounted emergency stop button, designed to conform to ISO 850
Provides switch lockout on cable pulled and cable slack
Includes cable status indicator on switch lid
Offers stainless steel 316 version
440E Lifeline Emergency Cable Pull Switches - Lifeline 5 standard housing without E-stop, 2 OSSD Inputs, 2 OSSD Outputs, 1 Aux Output, 1 Tension Output, 8-Pin Micro (M12)
Popular items
440F-C251P, Allen Bradley Guardmaster
Safedge Controller, Surface Mount
EC type approved (applies when Safedge profiles are used in conjunction with a Safedge Evaluator)
May be cut to size and fit
Corner and straight connectors are "active" components - no "dead" zones
The Safedge Evaluator monitors the status of the Safedge profile and provides an output of two fully cross monitored relays with complete redundancy
One Safedge Evaluator unit monitors up to 50m Safedge profile
Two safety relay outputs
Changeover auxiliary relay
Auto/manual reset
Indicators for RUN, STOP and FAULT conditions
Provides contactor monitoring
Selectable input voltage
Control circuit voltage - all relay outputs are volt free
IP65 rated
Dimensions: H130mm, W130mm, D75mm
Popular items
450L-B4HN1650YD, Allen Bradley Guardmaster
Bulletin 450L GuardShield POC safety light curtains are unlike traditional safety light curtains, which are based on separate transmitter and receiver units. This next generation light curtain system features patented technology, which allows each transceiver to be used as a transmitter or receiver via an innovative plug-in module.
Each transceiver can be used either as a transmitter or receiver via an innovative plug-in module
Features an active protective field that senses over the entire length of a transceiver
Offers a wide range of protection heights 150…1950 mm in increments of 150 mm
Features a compact housing design 30 x 30 mm
450L-B Guard Shield 30mm (1.18 in.), 1650 mm (65.01 in.)
Popular items
889D-F4NEDM-1, Allen Bradley Guardmaster
Our Bulletin 889 DC Micro (M12) Cordsets & Patchcords provide secure connections for proximity sensors, limit switches, photoelectric sensors and other field devices. Available with straight or right-angle 4- or 5-pin overmolded connectors, these cables feature a choice of materials and jacket colours, including red to identify safety applications. Some models include braided shielding for noise reduction and status indicators for power and output status indication.
Patchcord: DC Micro (M12), Female, Straight, 4-Pin, PVC Cable, Red, Unshielded, IEC colour Coded, DC Mic, Male, Straight, 1 meter (3.28 feet)
Includes multiple jacket types: PVC, PUR, TPE, Toughlink™ and Toughweld™
Offers standard 1, 2, 5 and 10m lengths
Offers standard 16, 18, 22 and 24 AWG cable
Includes ratcheting coupling nut for added vibration resistance
Offers DC micro-to-mini and DC micro-to-pico cable models
Offers red cable jackets to identify safety networks on your machines
Popular items
889D-F8NBDM-0M6, Allen Bradley Guardmaster
Our Bulletin 889 DC Micro (M12) Cordsets & Patchcords provide secure connections for proximity sensors, limit switches, photoelectric sensors and other field devices. Available with straight or right-angle 4- or 5-pin overmolded connectors, these cables feature a choice of materials and jacket colours, including red to identify safety applications. Some models include braided shielding for noise reduction and status indicators for power and output status indication.
DC Micro (M12), Female, Straight, 8-Pin, PVC Cable, Red, Unshielded, IEC colour Coded, DC Mic, Male, Straight, 0.6 meter (1.97 feet)
Includes multiple jacket types: PVC, PUR, TPE, Toughlink™ and Toughweld™
Offers standard 1, 2, 5 and 10m lengths
Offers standard 16, 18, 22 and 24 AWG cable
Includes ratcheting coupling nut for added vibration resistance
Offers DC micro-to-mini and DC micro-to-pico cable models
Offers red cable jackets to identify safety networks on your machines
Popular items
440K-A11144, Allen Bradley Guardmaster
Allen-Bradley Safety Switch Accessories
A range of accessories for Allen-Bradley safety switches.
Catch and Retainer Kit
For use with Trojan 5 and Trojan 6 switches
Not to be used with GD2 switches
Alignment guide with semi-flexible actuator
Interlock Switch
Popular items
440N-Z30UPT, Allen Bradley Guardmaster
SensaGuard 440N Cylindrical Non-Contact Switch
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range for optimum operation and tolerance to misalignment, these non-contact switches are a cost-effective solution to a wide range of industrial safety applications.
No dedicated controller required for its RFID coding security
Switches can be connected in series with other devices (e.g. Light Curtains, E-stops, interlock switches)
PLe, SIL 3, Cat 4 rating maintained with multiple units connected in series
Can be connected to standard safety relays, SmartGuards and safety I/O blocks
They provide three different types of PNP output including one auxiliary PNP
Equipped with an LED to indicate the device status and any faults
IP69K environmental rating
Note
Stainless steel version suitable for use in harsh environments.
Standards
IEC60947-5-3, IEC 61508, EN954
Supplied with
Actuator.
Popular items
440H-S34010, Allen Bradley Guardmaster
Sprite 3
A miniature hinge operated safety interlock switch with 2 sets of contacts and a full IP67 ingress rating. Particularly useful for light duty hinged guard doors, covers or flaps. Cam may be adjusted in-situ to assist in accurate installation and minimise nuisance tripping
Miniature case (75mm x 25mm)
Rotateable head facilitates; 4 possible shaft positions
Adjustable operating speed
Make-before-break contacts
Forced guided contacts - complies with EN 1088, IEC 947-5-1
Note
These are not to be used for load bearing applications
Hinge Switch
Popular items
440N-Z21W1PB, Allen Bradley Guardmaster
MC2, Coded, IP69K
Non-contact actuation
Magnetic coded sensing
High tolerance to misalignment
LED indication
2 N/C solid state relay outputs and 1 PNP auxiliary output
Switching current: 200 mA @ 24Vdc
Supply Voltage: 24Vdc
IP 69K protection rating
Category 1 device per EN 954-1, dual channel contacts suitable for Cat 3 or 4 systems
Popular items
440N-Z21W1PA, Allen Bradley Guardmaster
MC2, Coded, IP69K Non-contact actuationMagnetic coded sensingHigh tolerance to misalignmentLED indication2 N/C solid state relay outputs and 1 PNP auxiliary outputSwitching current: 200 mA @ 24VdcSupply Voltage: 24VdcIP 69K protection ratingCategory 1 device per EN 954-1, dual channel contacts suitable for Cat 3 or 4 systems
New Items
New items
440H-S34010, Allen Bradley Guardmaster
Sprite 3
A miniature hinge operated safety interlock switch with 2 sets of contacts and a full IP67 ingress rating. Particularly useful for light duty hinged guard doors, covers or flaps. Cam may be adjusted in-situ to assist in accurate installation and minimise nuisance tripping
Miniature case (75mm x 25mm)
Rotateable head facilitates; 4 possible shaft positions
Adjustable operating speed
Make-before-break contacts
Forced guided contacts - complies with EN 1088, IEC 947-5-1
Note
These are not to be used for load bearing applications
Hinge Switch
New items
440N-Z21W1PB, Allen Bradley Guardmaster
MC2, Coded, IP69K
Non-contact actuation
Magnetic coded sensing
High tolerance to misalignment
LED indication
2 N/C solid state relay outputs and 1 PNP auxiliary output
Switching current: 200 mA @ 24Vdc
Supply Voltage: 24Vdc
IP 69K protection rating
Category 1 device per EN 954-1, dual channel contacts suitable for Cat 3 or 4 systems
New items
889D-F4NEDM-1, Allen Bradley Guardmaster
Our Bulletin 889 DC Micro (M12) Cordsets & Patchcords provide secure connections for proximity sensors, limit switches, photoelectric sensors and other field devices. Available with straight or right-angle 4- or 5-pin overmolded connectors, these cables feature a choice of materials and jacket colours, including red to identify safety applications. Some models include braided shielding for noise reduction and status indicators for power and output status indication.
Patchcord: DC Micro (M12), Female, Straight, 4-Pin, PVC Cable, Red, Unshielded, IEC colour Coded, DC Mic, Male, Straight, 1 meter (3.28 feet)
Includes multiple jacket types: PVC, PUR, TPE, Toughlink™ and Toughweld™
Offers standard 1, 2, 5 and 10m lengths
Offers standard 16, 18, 22 and 24 AWG cable
Includes ratcheting coupling nut for added vibration resistance
Offers DC micro-to-mini and DC micro-to-pico cable models
Offers red cable jackets to identify safety networks on your machines
New items
889D-F8NBDM-0M6, Allen Bradley Guardmaster
Our Bulletin 889 DC Micro (M12) Cordsets & Patchcords provide secure connections for proximity sensors, limit switches, photoelectric sensors and other field devices. Available with straight or right-angle 4- or 5-pin overmolded connectors, these cables feature a choice of materials and jacket colours, including red to identify safety applications. Some models include braided shielding for noise reduction and status indicators for power and output status indication.
DC Micro (M12), Female, Straight, 8-Pin, PVC Cable, Red, Unshielded, IEC colour Coded, DC Mic, Male, Straight, 0.6 meter (1.97 feet)
Includes multiple jacket types: PVC, PUR, TPE, Toughlink™ and Toughweld™
Offers standard 1, 2, 5 and 10m lengths
Offers standard 16, 18, 22 and 24 AWG cable
Includes ratcheting coupling nut for added vibration resistance
Offers DC micro-to-mini and DC micro-to-pico cable models
Offers red cable jackets to identify safety networks on your machines
New items
440F-C251P, Allen Bradley Guardmaster
Safedge Controller, Surface Mount
EC type approved (applies when Safedge profiles are used in conjunction with a Safedge Evaluator)
May be cut to size and fit
Corner and straight connectors are "active" components - no "dead" zones
The Safedge Evaluator monitors the status of the Safedge profile and provides an output of two fully cross monitored relays with complete redundancy
One Safedge Evaluator unit monitors up to 50m Safedge profile
Two safety relay outputs
Changeover auxiliary relay
Auto/manual reset
Indicators for RUN, STOP and FAULT conditions
Provides contactor monitoring
Selectable input voltage
Control circuit voltage - all relay outputs are volt free
IP65 rated
Dimensions: H130mm, W130mm, D75mm
New items
440R-N23130, Allen Bradley Guardmaster
Minotaur MSR127RTP Safety Relay, Single Channel
The MSR127RTP is a single function safety relay that can be connected in three different input wiring configurations: one normally closed, two normally closed, or with two PNP connections from a light curtain. When connected in the two normally closed configuration, the MSR127RTP checks for cross faults across the two inputs. When connected to light curtains, the light curtain must perform the cross fault detection.
The MSR127RP relay has a monitored manual reset whereas the MSR127TP relay has an automatic/manual reset. Models with automatic/manual reset can have the reset jumpered or can be converted to an unmonitored manual reset by adding a normally open switch in the monitoring loop. Models with monitored manual reset provide checking of the output monitoring circuit.
The outputs of the relay include three normally open safety-rated outputs as well as one normally closed auxiliary output. The safety outputs have independent and redundant internal contacts to support the safety function. The auxiliary output is a non-safety output intended to provide an external signal about the status of the safety outputs.
Can be connected in three different input wiring configurations: 1 N/C, 2 N/C, or with 2 PNP connections from a light curtain. When connected to light curtains, the light curtain must perform the cross fault detection.
Stop category 0
Cross fault monitoring
Monitored or automatic reset
Removable terminals
Light curtain, E-stop or safety gate applications
Cat. 4 per EN954-1
Standards
EN 954-1, ISO 13849-1, IEC/EN 60204-1, IEC 60947-4-1, IEC 60947-5-1, ANSI B11.19, AS4024.1.
New items
440N-G02023, Allen Bradley Guardmaster
Ferrogard 6, 9 & 10 Slim Non Contact Safety Switch
The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch opens the N.C. safety contacts therefore isolating the control power to the machines primary control element. Moulded in ABS plastic with a slim rectangular housing to accommodate narrow mounting areas and sealed to IP67 (NEMA 6P), these non-contact switches are ideal for wet environments. They have two active sensing faces allowing more flexible mounting options.
Slim housings to accomodate narrow mounting areas
Two active sensing faces allowing more flexible mounting options
Operating distance for safety contacts: make 12mm; break 23mm
Operating temperature range: -10°C to +65°C
M4 mounting
IP67 rating (NEMA 6P)
Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems
Approvals
CE Marked for all applicable directives and cULus.
Standards
EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1.
New items
440K-A11144, Allen Bradley Guardmaster
Allen-Bradley Safety Switch Accessories
A range of accessories for Allen-Bradley safety switches.
Catch and Retainer Kit
For use with Trojan 5 and Trojan 6 switches
Not to be used with GD2 switches
Alignment guide with semi-flexible actuator
Interlock Switch
New items
440N-Z30UPT, Allen Bradley Guardmaster
SensaGuard 440N Cylindrical Non-Contact Switch
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range for optimum operation and tolerance to misalignment, these non-contact switches are a cost-effective solution to a wide range of industrial safety applications.
No dedicated controller required for its RFID coding security
Switches can be connected in series with other devices (e.g. Light Curtains, E-stops, interlock switches)
PLe, SIL 3, Cat 4 rating maintained with multiple units connected in series
Can be connected to standard safety relays, SmartGuards and safety I/O blocks
They provide three different types of PNP output including one auxiliary PNP
Equipped with an LED to indicate the device status and any faults
IP69K environmental rating
Note
Stainless steel version suitable for use in harsh environments.
Standards
IEC60947-5-3, IEC 61508, EN954
Supplied with
Actuator.
New items
440R-N23119, Allen Bradley Guardmaster
Minotaur MSR126R and MSR126T, Single or Dual Channel
The MSR126R/T is designed for connection to a single channel safety gate, a single channel e-stop or a light curtain that provides cross fault detection. The MSR126.1R/T is designed for connection to a dual channel safety gate or e-stop, as it performs cross fault detection across the inputs.
Stop category 0
Cross fault monitoring
Monitored manual or automatic reset
Cat. 4 per EN954-1
New items
440F-M2030BYNN, Allen Bradley Guardmaster
MatGuard 440F Series Safety Mats
The MatGuard safety mat is a pressure-sensitive safeguarding product that is designed to detect the presence of people on its sensing surface.
The MatGuard safety mat has two conductive hardened steel plates that are held apart by non-conductive compressible separators. Each four-wire mat, operating on only 24 Vdc, is pre-wired and connected in series with other mats to form a floor level guarding system for hazardous areas. The circuit through the mat must be monitored by a safety-rated control unit, which may be a Minotaur Safety Relay, MatGuard control unit, or MatGuard Mat Manager.
When the mat is clear, the control unit provides a signal to the machine control circuit. When a mat is stepped on, the conductive plates touch and the resistance in the circuit falls to zero. This is monitored by the control unit, which sends a shutdown signal to the machine.
Since the MatGuard safety mat is completely sealed (IP67), water, liquids and coolants present no problem. In addition, the tough vinyl will resist bleaches, acids, salts and many industrial chemicals. The unique moulding process allows the long life and reliability of the mat.
Hardened steel plate construction
No dead spots
4-wire system to detect opens and shorts
Can withstand a static pressure of 4500 psi
IP67 rated
For suitable controller please see
249-6302
New items
440N-S32033, Allen Bradley Guardmaster
Allen-Bradley Sipha S2 Non-contact Safety Switch
The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit.
Coding meets the requirements of more complex applications where simple magnetically actuated switching may not be sufficient
Head & actuator are IP67 rated, which is ideal for steam cleaning or high pressure hosing down
Non-contact actuation
Magnetic coded sensing
Slim moulded ABS housing, 82x19x19mm
Must be operated with its own safety control unit
Approvals
UL, CSA.
Standards
EN1088, EN292, EN60204-1.
Supplied with
Stock nos.
334-0777
&
335-5763
have a 3m cable attached, stock no.
873-2219
has a 10m cable attached.
Don’t hesitate to ask questions for better clarification.