Light Fixtures: How To Maintain It?

Facebook Tweet LinkedIn Pin Email

Contents hide

1 What is a light fixture?

2 Safety tips must be followed

3 How to replace a light fixture?

4 Make light fixtures reliable by cleaning

5 Conclusion

5.1 Related posts:

What is a light fixture?

A light fixture is an electrical device that fixes bulbs and lights on the wall or roof of your room. Then, you attach the light bulbs, light tubes, or other electrical elements that create artificial light, and it is difficult to remove also.

Safety tips must be followed

A few points that are discussed below would help you to stay safe from danger, and by following these steps, you will be safe and sound. Have a look at some safety tips while you are installing a light fixture.

Keep all the parts, like bulbs, tubes, etc., away from the kids.
If it is needed to change the junction box, then change it for fans and heavy lights.
It is more beneficial when you call a licensed electrician.
First, check that the power is off, and then start your work.
Never start work when wires are hot.
Take the circuit voltage tester of all the wires of the circuit.
Don’t overtake the high wattage of the fixture.
Check whether the junction box should support the heavy lights and fans.
Do this work with a partner.
First, read all the instructions.
Follow local codes.

How to replace a light fixture?

If you want to maintain your light fixtures, then it is mandatory to change or replace them from time to time, and you get better results. However, if you are interested in changing or replacing the light fixture, then you should follow the safety precautions, and you have to follow the manufacturer’s instructions to do this work properly without danger of electrical hazards because if you are not following the safety instruction, then it would be harmful to you. So, if you are not capable of doing this work, then you should call a licensed electrician to fix or replace light fixtures. Here are some steps mentioned that will help you to replace or fix the light fixture easily.

When you are working in the bedroom, then you should disconnect the electric power of the bedroom from your electrical circuit.
First, remove the cover of your old fixture and then remove the wire from it and remove the old fixture.
It has to be confirmed that the screws in the electrical box must not be loose, and if it happens, then you need to tighten up all the screws again.
Attach the wires by following the manufacturer’s instructions.
Fix a light bulb along the right wattage for the fixture and turn on the main electrical circuit.
Lastly, shelter the light fixture and put it in place trim.

Make light fixtures reliable by cleaning

We all know that there is a variety of electrical elements in the market and every light has its different cleaning procedure, like LED lights, Ceiling fans, lamps, etc. Let’s read simple and easy cleaning tips and tricks for the different light fixtures.

Flush Mount Ceiling Lights

First, make a solution of dish wash, vinegar, and water, then take off the covers, dip them in soapy water, then clean with a semi-wet cloth and fix it when it dries.

Pendant Lights

Turn off the light and let the bulbs cool, and then wipe them out with a wet cloth. Extensions of boards and cables are cleaned with a dry cloth.

Chandeliers

Bring down the chandeliers and spread them on the table, then soak them in soapy, warm water, wipe them with a semi-wet cloth, and lastly, dry them with a dry cloth to remove stains.

Recessed Lights

Clean the inside and outside of the canisters, clean the bulbs also with a wet cloth and let them dry.

Conclusion

The simple and easy tips and tricks to maintain and clean the light fixtures help you to get better results of light in your homes and working areas. So, the life span of electrical elements will be increased by applying these instructions and brighter your rooms. But if you do not know or you are confused about it, then it is compulsory to call a licensed electrician to make it possible in the safe mode.